Thursday, June 3, 2010
Tuesday, June 1, 2010
Monday, May 31, 2010
Story Board
My story board for My Archi-commune
May or may not change before the due date - Wed 2nd June 2010
Comments Welcome :)
Wednesday, May 19, 2010
Multi-residential Facility
This is what i'm basing my latest Architecture Assignment ( Multi-residential Facility) on.
Cubism/ Inverted Cubism
Should be interesting...
Wednesday, April 21, 2010
Wearable Architecture At the Moment
Wearable Architecture Page 1
Hi Everyone,
This is my page 1 of 2 at the moment for my Wearable Architecture assignment.
Do you think it is too cluttered?
Feedback welcome.
~Mew
Monday, April 19, 2010
Transformers more than meets the eye!
The top half of my wearable architecture with the lights on.
More to come!
Wearable Architecture
Thursday, March 25, 2010
Wednesday, March 24, 2010
Monday, March 22, 2010
Firmness, Commodity and Delight
Firmness, Commodity and Delight have been diagrammed for both the exemplar house (Taringa house and studio) and the Cabin.
Sunday, March 21, 2010
Lego Cabin adjusted and with a Roof!
I adjusted my Lego cabin as I found a mistake with the stairs going to the bathroom when I was drawing the plans. I also made a roof out of paper.
Saturday, March 20, 2010
Lego Cabin
I made my cabin out of Lego to work out the spatial aspects and the split levels. Each room is a different colour. The house will have supports but i ran out of Lego to make those.
The scale of the rooms is roughly correct in Lego brick sizing I.e. 2 Bricks long = 1 meter and 2 bricks high =1 meter. So the size of the bedroom is 3 x 4 x 2 meters (hight in real life for the rooms is 2.4m unless stated otherwise.
Here is some pictures.
Note the orientation of the house.
Thursday, March 18, 2010
Base Idea for Cabin
This is my base idea for my Cabin.
The design is meant to be for Rex Addison and partner with inspiration from his Taringa House and Studio.
All the levels are in one plan so I could work out what levels I could put on top of each other as I have lots of split levels. (Its easier to work out the levels from the coloured section drawing in the middle).
The elevation is the start of what my Cabin might look like from the outside. I haven't quite worked out the roof structure yet but it will be a combination of the Taringa House roof and the Studios roof.
And of course there will be stilts (maybe even red) to hold the rooms up . I just haven't drawn them in yet.
Taringa House and Studio Re-draw
This is my re-draw of Taringa House and Studio there is still a few elements to come.
Subscribe to:
Posts (Atom)
